Noisecom's noise diodes are the fundamental building blocks of analog noise systems. They are sorted for performance characteristics that enhance their broadband noise generation output and flat spectral response.
The NC1000 Series amplified noise modules produce AWGN as high as +13 dBm, and have bandwidths up to 10 GHz. They are designed for high power noise immunity, and jamming applications, or as low power, high crest factor jitter sources.
The NC2000 Series amplified noise modules are an excellent choice for high-level noise modules mounted on a circuit board. The NC2000 Series modules are housed in 24, or 14-pin dual-inline packages. The NC4000 series modules are housed in a 40-pin module that cover similar noise bands of the NC2000, but have higher crest factor, and 60 dB of TTL controlled attenuation
The NC3400 Series coaxial noise sources are an excellent choice for applications requiring high ENR and immunity to large incident RF power, such as ATE, radiometer, and radar systems.
Noisecom's NC346 Series is designed for Broadband coaxial noise figure measurement applications. Each module's low VSWR reduces reflections and increases measurement accuracy.
The PNG7000A Series instruments generate white Gaussian noise and provide a summing input to control signal-to-noise (SNR) or carrier-to-noise (CNR) for bit-error-ratio (BER) testing. A key feature of this instrument is its low distortion signal path that sums the user-supplied signal with the internal precision white noise source. Optional DC coupling allows adding noise directly to a digital TTL, ECL type signal.
The Noisecom programmable DNG7500, generates pseudo-random noise and CW signals for RF, Microwave, and digital applications. It can provide up to a 70 MHz wide RF output to emulate real-world noise and interference conditions. User created MatLAB data files can be imported for digital conversion and subsequent analog signal output. Standard GPIB, and optional Ethernet remote control interface.
The NBS-Series are standards based on the fundamental physic constants of thermal noise and blackbody radiation. The system provides outstanding accuracy when measuring extremely low noise figures (noise temperatures).
The Noisecom 60 GHz Noise Figure test set has 4 separate systems designed to perform Y-factor noise figure measurements using a high performance Spectrum Analyzer or a dedicated receiver
The DSG9000 series instruments are HD Radio signal sources designed to play pre-recorded vector files that replicate various HD Radio service modes and channel configurations.
The high power output of the Merlin is designed to reduce costly service technician repeat calls due to intermittent cable system problems. The single tone frequency output of the Merlin paired with a leakage detector allows the discovery of damaged cable system components.
Seitenanfang
Seite drucken